Computational Combustion Optimization for Reducing Fuel Consumption and Thermal Losses in High-Capacity Industrial Boiler Systems
Keywords:
Combustion Optimization, Industrial Boilers, Fuel Consumption, Thermal Losses, Computational Fluid DynamicsAbstract
High-capacity industrial boiler systems require efficient combustion control to reduce fuel consumption and thermal losses while maintaining steam production, combustion stability, and reliable heat transfer. This study quantitatively evaluated a computational combustion-optimization framework integrating operational data, computational fluid dynamics (CFD), statistical analysis, sensitivity assessment, and multi-parameter optimization. From 14,860 initially collected operating observations, 13,742 were retained after quality screening, representing a 92.5% retention rate and 99.2% data completeness across partial-, nominal-, and high-load conditions. Baseline operation recorded a mean boiler load of 78.6%, steam generation of 181.7 t/h, fuel flow of 13.84 t/h, thermal efficiency of 86.72%, and total thermal loss of 13.28%. Following optimization, fuel flow decreased to 13.15 t/h, while specific fuel consumption declined from 76.17 to 72.31 kg/t of steam, representing a 5.07% reduction. Boiler thermal efficiency increased to 90.08%, combustion efficiency reached 98.61%, and useful wall heat absorption increased by 4.17%. Total thermal loss decreased by 25.30% to 9.92%, while dry flue-gas loss declined by 29.80%. Stack temperature decreased from 168°C to 151°C, stack O₂ decreased from 4.31% to 3.52%, and CO declined from 87.6 to 63.4 ppm. Temperature nonuniformity decreased by 26.21%, while steam generation remained essentially unchanged at 181.9 t/h. Load-specific fuel-consumption reductions ranged from 4.62% to 5.71%. Statistical analysis identified strong relationships between boiler load and fuel flow (r = 0.91), excess air and thermal loss (r = 0.68), and stack temperature and dry flue-gas loss (r = 0.74). CFD and predictive validation produced an integrated R² of 0.947 and MAPE of 2.07%, while robustness testing confirmed consistent optimization benefits across load, mesh, boundary-condition, and model variations. The findings demonstrated that coordinated computational optimization substantially improved fuel utilization, reduced avoidable thermal losses, enhanced heat-transfer performance, and maintained required industrial steam production.


